
It is available in stainless steel, carbon steel, and alloy steel to improve wear resistance and corrosion resistance. The technique for tightening them in place on the surface is to apply the required amount of torque to the nut while inserting and holding the key in the socket. If there is insufficient space on the surface for wrenches to create a hole for screws, these countersunk socket screws are used to keep the screws neatly seated on the surface and the structure smooth.
STANDARD SPECIFICATION
- Stainless Steel CSK Screw standard:- ISO 14583
- DIN Standard:-B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985
- UTS – Unified Thread Standard:- UNC, UNF, UNEF, UNS, NPT, NPTF
- Stainless Steel counter sunk screws standard:- ISO 10642
- Grade:-18-8 Stainless Steel, 4.8, 8.8, A2, A4, A2-70; A4-70; A4-80 Countersunk Screws
- British standards:-BS 57
- Length:- 3 mm to 200 mm
- Stainless Steel Threads:-METRIC, BSW, BSF, UNC, UNF or as required
- Stainless Steel Countersunk Screws Size:-Cold Froging : M2-M24, Hot forging M24-M100, 1-1/2” Dia, up to 1100mm lg, Machining and CNC for Customized connecting element: up to M100 / 4” Dia, up to 1500mm lg Stainless Steel Countersunk Screws M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes
- Stainless Steel Threads:-METRIC, BSW, BSF, UNC, UNF or as required
- Standard:-ISO 14585C ~DIN 7981C, DIN 7973C ~ISO 1483, DIN 7983C ~ISO 7051, ISO 4762, ISO 2009, ISO 7050, ISO 14587, ISO 14587, ISO 14584, ISO 14582, ANSI B18.3.1M, ASME B18.6.3, GB/T5782, GB/T5783, GB5783 DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards ANSI – American National Standards Institute
- Dimensions:-ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.
- Tolerance:-+/-0.01mm to +/-0.05mm
- Head drive:Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
- Type:Pan/ Round/ Oval/ countersunk/ Truss head
- Head:Pan head, flat head, oval head, hex head, phillips head
- Finishing:-Zinc (yellow, white, blue, black), black oxide Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
- Finish:-Per ASTM A380/A380M
- Production process:-Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing
- Surface Coating::-Ptfe Coated Countersunk Screws , Hot Dipped Galvanizing Countersunk Screws , Phosphate Countersunk Screws , Teflon Countersunk Screws, Xylon Countersunk Screws , Zinc Phosphate Countersunk Screws, Manganese Phosphate, Zinc Electro Plating (Hexavalent or Trivalent Chrome), ZAC (Zinc Alluminium Flake Coating), Cadmium Countersunk Screws All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.
- Surface treatment:-Polish, Passivation, Anodizing, Sand blasting, Heat-disposing, Hot dip galvanizedHeat-disposing, Rust preventive oil, Black oxide coating, Ruspert coating screws, Electroplating (color, blue, white, black zinc, Ni, Cr, tin, silver)
- Top Manufacturers:-SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
- Stainless Steel Countersunk Screws Packing:-IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
- Why choose us?:-Best Price in India and compare to China, Professional technical team, High precision threads, Strong production line, Micro Metals will be your reliable partner
- Test Certificate:-Manufacturer Test Certificate as per EN 10204 / 3.1, Tensile testing to ISO 898-1, Nut proof load testing to ISO 898-2, Suitability for preloading to EN 14399-2, Suitability test for calibrated preload to EN 14399-10, Charpy Impact testing in accordance with ISO 148-1, Hardness testing to ISO 6508-1, Tri-Roll Thread Comparators, Calibrated gauges and tools
- Other available material:-Stainless Steel Countersunk Screws: SUS201, SUS304, SUS316, SUS410, Brass Countersunk Screws : C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40), Bronze Countersunk Screws: C51000, C52100, C54400 etc, Aluminum Countersunk Screws: Al6061, Al6063 etc, Aluminum Alloy Countersunk Screws: Al6061, Al6063 etc, Titanium and Titanium Alloy Countersunk Screws: TAD, TA1-TA8, TB2, TC1-TC10, Alloy steel : SCM435, C10B21, C10B33
- Uses & application:-Wind tower, Nuclear power, Railway, Automotive industry, Construction, Electronic industry
- Stainless Steel CounterSunk Screw :-AISI 302, 304, 304L,316, 316L, 310, 317, 316S31,317L, 321, 347, 410, 420,904L etc.
- Duplex & Super Duplex Steel CounterSunk Screw:-ASTM / ASME A815 UNS No. S31803, UNS No. S 32205, UNS No. S 31254, UNS No. S 31550, UNS No. S 32750, and UNS No. S 32760
- Carbon Steel CounterSunk Screw:-ASTM A307, A193
- Alloy Steel CounterSunk Screw:-ASTM / ASME A/SA 193 / 194 B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
- Nickel Alloy CounterSunk Screw:-ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
Nominal size |
Body Dia |
Thread Pitch |
Hex Socket Size |
Max Cone Dia |
Head Dia |
Head Height |
Soc. length |
||
D(max) |
D(min) |
J |
A1 |
A_max |
A_Min |
H |
K |
||
M3 |
3.00 |
2.86 |
0.5 |
2,0 |
6,72 |
6,00 |
5,82 |
1,86 |
1,05 |
M4 |
4.00 |
3.82 |
0.70 |
2,5 |
8,96 |
8,00 |
7,78 |
2,48 |
1,49 |
M5 |
5.00 |
4.82 |
0.8 |
3,0 |
11,2 |
10,00 |
9,78 |
3,1 |
1,86 |
M6 |
6.00 |
5.82 |
1.0 |
4,0 |
13,44 |
12,00 |
11,75 |
3,72 |
2,16 |
M8 |
8.00 |
7.78 |
1.25 |
5,0 |
17,92 |
16,00 |
15,73 |
4,96 |
2,85 |
M10 |
10.00 |
9.78 |
1.5 |
6,0 |
22,4 |
20,00 |
19,67 |
6,2 |
3,60 |
M12 |
12.00 |
11.73 |
1.75 |
8,0 |
26,88 |
24,00 |
23,67 |
7,44 |
4,35 |
M16 |
16.00 |
15.73 |
2.0 |
10,0 |
33,6 |
32,00 |
29,67 |
8,8 |
4,89 |
M20 |
20.00 |
19.67 |
2.5 |
10,0 |
40,32 |
40,00 |
35,61 |
10,16 |
5,49 |
LENGTHS
|
#2
|
#3
|
#4
|
#5
|
#6
|
#8
|
#10
|
#12
|
1/4″
|
5/16″
|
3/8″
|
1/8
|
0.40 |
0.55 |
0.70 |
1.1 |
1.4 |
||||||
3/16
|
0.50 |
0.70 |
0.90 |
1.2 |
1.5 |
2.5 |
3.9 |
||||
1/4
|
0.60 |
0.80 |
1.00 |
1.4 |
1.7 |
2.8 |
4.3 |
5.6 |
8.5 |
||
5/16
|
0.60 |
0.90 |
1.20 |
1.5 |
1.9 |
3.1 |
4.6 |
6.1 |
9.1 |
16.7 |
|
3/8
|
0.70 |
0.90 |
1.30 |
1.7 |
2.1 |
3.4 |
5.0 |
6.5 |
9.8 |
17.7 |
29.2 |
7/16
|
0.80 |
1.00 |
1.50 |
1.9 |
2.2 |
3.6 |
5.4 |
6.9 |
10.4 |
18.8 |
30.7 |
1/2
|
0.80 |
1.10 |
1.60 |
2.0 |
2.4 |
3.9 |
5.8 |
7.4 |
11.1 |
19.8 |
32.2 |
9/16
|
0.90 |
1.20 |
1.70 |
2.2 |
2.6 |
4.2 |
6.2 |
7.8 |
11.7 |
20.9 |
33.6 |
5/8
|
1.00 |
1.30 |
1.80 |
2.3 |
2.8 |
4.5 |
6.6 |
8.3 |
12.4 |
21.9 |
35.1 |
3/4
|
1.10 |
1.50 |
2.10 |
2.6 |
3.2 |
5.0 |
7.3 |
9.2 |
13.6 |
24.0 |
38.0 |
7/8
|
1.30 |
1.70 |
2.30 |
3.0 |
3.5 |
5.6 |
8.1 |
10.1 |
14.9 |
26.1 |
41.0 |
1″
|
1.40 |
1.90 |
2.50 |
3.4 |
3.9 |
6.2 |
8.9 |
11.0 |
16.1 |
28.8 |
44.0 |
1-1/8″
|
1.50 |
2.00 |
2.80 |
3.8 |
4.3 |
6.7 |
9.6 |
11.9 |
17.4 |
30.2 |
47.0 |
1-1/4″
|
1.60 |
2.20 |
3.00 |
4.1 |
4.6 |
7.3 |
10.4 |
12.8 |
18.7 |
32.3 |
49.8 |
1-1/2″
|
1.80 |
2.50 |
3.50 |
4.7 |
5.3 |
8.3 |
11.9 |
14.7 |
21.2 |
36.5 |
55.8 |
1-3/4″
|
2.10 |
2.90 |
4.00 |
5.3 |
6.1 |
9.4 |
13.5 |
16.5 |
23.7 |
40.7 |
61.7 |
2″
|
2.40 |
3.30 |
4.50 |
6.0 |
6.8 |
10.6 |
15.0 |
18.3 |
26.2 |
44.8 |
67.6 |
2-1/4″
|
2.60 |
3.60 |
5.00 |
6.7 |
7.6 |
11.8 |
16.6 |
20.1 |
28.8 |
19.0 |
73.5 |
2-1/2″
|
2.80 |
3.90 |
5.50 |
7.3 |
8.3 |
12.9 |
18.1 |
22.0 |
31.3 |
53.2 |
79.5 |
2-3/4″
|
3.10 |
4.30 |
6.00 |
7.9 |
9.1 |
13.9 |
19.7 |
23.8 |
33.9 |
57.3 |
85.3 |
3″
|
3.40 |
4.70 |
6.50 |
8.6 |
9.8 |
15.0 |
21.2 |
25.6 |
36.4 |
61.5 |
91.3 |
* Weights above are approximate and are based on pan head machine screws
|
TYPES OF COUNTERSUNK SCREWS











