
Both ends have angled points, but either one or both ends can have a round point. Double-ended studs are used for bolting flanges and in other situations where torching from both ends is needed or desired. Double end threaded studs are also known as dual threaded rods or double-ended studs. It comes with the same amount of thread on both ends or with different amounts of thread on each end (one end has more thread than the other). The Double End Threaded Rod can be used for many different things, like doors and assembly housings. It is usually put into a hole that doesn't have threads and held in place with nuts on both ends. A double-threaded screw is a fastener with threads on both ends of the shaft that are the same length.
STANDARD SPECIFICATION
- product name:-Stainless Steel Double Ended Stud
- Standard:-ISO 4017, DIN931, GB5783, DIN, ASTM, ANSI, JIS, EN, AS
- DIN Standard:- B.S. DIN933 DIN931 DIN934 DIN912 DIN603 DIN6923
- Place of Origin:-India
- Surface treatment:-plain/ Passivation
- Diameter:-M3-M60
- Length:-6mm To 500mm
- Head:-Square, Hex, Hex flange, Round, T-head , Flat & Triangular etc
- Finishing:-Hop Dip Galvanized (HDG) phosphorization, Zinc Plated (Yellow, White, Blue, Black), Geomet, Black Oxide, anodization, Dacroment, Zinc-Nickel plated, Nickel plated, Tin Plated, Brass Plated, Black Plated, Salt fog test, Gold Plated
- Neck type:-Square, Hex, Oval, Triangular & Knurled etc
- Dimensions:-ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.
- Material:-stainless steel ss 304/ SS316 A2/A4, 18-8 Stainless Steel, SS303, SS201, SS316, SS304, SS904L, SS316L, A4-70; A2-70; A4-80
- Drive type:-Slotted, Phil, Torx , Hex socket, & square slot etc
- Application of :-Nuclear power, Wind tower, Automotive industry, Railway, Electronic, Construction industry,
- Drive Style:-Type I
- Thread Requirements:-UNC & UNF, ASME B1.1, Class 2A (Fastenal will inspect and accept parts with a 1A no-go gauge)
- Production technology:-Cold Forged
- Manufacturing Process:-Cold Heading, Wire Drawing, Heat Treatment, Insert tapping, Inspection, Packing, Surface Plating
- Surface treatment of:-Electroplating (color, blue, white, black zinc, Ni, Cr, tin, silver), Hot-dip galvanizing, Rust preventive oil, Sand blasting, Passivation, Anodizing, Black oxide coating, Polish, Heat-disposing
- Others:-OEM, ODM, ±0.03MM tolerance
- Coatings:-Cadmium, Black Oxide, Teflon, Galvanized, Zinc, Xylan, Others Upon Request
- Tolerance of:-+/-0.01mm to +/-0.05mm
- Stainless Steel Double-Ended-Stud :-AISI 302, 304, 304L,316, 316L, 310, 317, 316S31,317L, 321, 347, 410, 420,904L etc.
- Duplex & Super Duplex Steel Double-Ended-Stud:-ASTM / ASME A815 UNS No. S31803, UNS No. S 32205, UNS No. S 31254, UNS No. S 31550, UNS No. S 32750, and UNS No. S 32760
- Carbon Steel Double-Ended-Stud:-ASTM A307, A193
- Alloy Steel Double-Ended-Stud:-ASTM / ASME A/SA 193 / 194 B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
- Nickel Alloy Double-Ended-Stud:-ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
1/2″-13 x 2″ | 3/8″-16 x 3″ |
3/8″-16 x 3/4″ | 3/8″-16 x 2″ |
3/4″-10 x 2-1/2″ | 1/2″-13 x 1-1/2″ |
5/8″-11 x 2-1/2″ | 5/8″-11 x 4″ |
3/8″-16 x 1″ | 5/16″-18 x 1″ |
3/8″-16 x 1-1/4″ | 3/8″-16 x 1-1/2″ |
5/8″-11 x 3″ | 1/2″-13 x 3″ |
3/4″-10 x 3″ | 1/2″-13 x 2-1/2″ |
5/16″-18 x 1-1/4″ | 3/8″-16 x 2-1/2″ |
1/4″-20 x 1″ | 1/2″-13 x 1-1/4″ |
TYPES OF DOUBLE END STUDS











